Single-Sided Walls

WALL Formwork

---

Most projects have varying wall heights and EFCO can accommodate every situation imaginable. Whether you have curved walls, straight walls, or both within your project, our products can fit what you’re looking for.

Single-Sided Walls The new Single-Sided Wall Truss® is EFCO’s solution when you need to form tall one-sided wall pours. The Single-Sided Wall Truss transmits the pour pressure through the formwork into the truss configuration and then into anchors installed in the slab or grade beam.

Single-Sided Wall Truss®

• A tieless formwork solution with the system anchored to the slab.
• Designed for 1,000 psf pour pressures at varied frame spacings depending upon height.
• Four modular sized trusses can deliver up to 40' tall walls to be poured.
• Ability to add EFCO SUPER STUD® formwork on top for additional height requirements.
• Engineered welded trusses provide labor savings during assembly.
• Front and rear truss-based jacks provide 6? of adjustment.
• Swivel wheels provide the system with the ability to be maneuvered in any direction when cycling large gangs.

Adaptable Single-Sided Concrete Wall System
The EFCO Single-Sided Wall Truss (SSWT) system is a modular, stackable, and flexible system that can be used to pour walls up to 40' tall in one-sided application.


Modular

• Spacing between assemblies of trusses can typically range between 24?-48? based on wall height and pour pressure requirements.
• Various bracing options allow for numerous configurations.
• Can use a 45° tie-down anchor system or front vertical and back horizontal support. The front anchor is either installed 45° to the horizontal or straight up and down (vertical). When the vertical anchor is used, a support bracket is needed to resolve the horizontal force.
• Each frame can fit on a standard 8' wide truck bed avoiding the need for wide load permits

Stackable

• The top frame is 12' tall with (3) additional 8' frames that can be bolted below for a 36' tall set-up. Add a SUPER STUD® to the top of the frame and walls up to 40' tall can be produced.

Flexible

• Accommodates any EFCO form system whether it be PLATE GIRDER®, EFCO LITE®, E-BEAM® and SUPER STUD, or even REDI-RADIUS®.
• Truss frames are universally compatible with both Imperial and Metric EFCO equipment.
• EFCO SUPER STUDS can be bolted to the top of the frame enabling even taller forming. This also enables the frame to be customized to any height.
• Wheel accessories can be added to any gang assembly enabling fast cycling between pours as well as eliminating the need for a crane to cycle.
• Turnbuckles enable variable spaces between frames depending on the height of the pour and the design pour pressure.

---

Contact us